■
Side
1 SHUTTER button ........................................ (p. 43)
Press this button to black out the image
temporarily.
2 ASPECT button ........................................... (p. 45)
Switches the image aspect ratio.
3 LENS (FOCUS, ZOOM, SHIFT) button ...... (p. 37)
These buttons are used to adjust the projection
lens.
4 Function 1 (FUNC1) button ........................ (p. 44)
This button can control the functions set in
"FUNC1" of the "OPTION1" screen from MAIN
MENU.
5 DEFAULT button ........................................ (p. 48)
Press this button to restore the default factory
setting.
6 ID SET button ...................................... (pp. 18, 75)
When two or more main units are used in the
system, this button specifies the ID of the remote
control.
7 ID ALL button ...................................... (pp. 18, 75)
When two or more main units are used in the
system, this button switches to the mode to control
them simultaneously with a single remote control.
8
■
Top
■
Bottom
8 LOCK button
This button is used to prevent unintentional
operation of the projector by accidentally pressing
a button, and to prevent the remote control
batteries from becoming spent.
9 Remote control transmitter window
Operate the remote control aiming at the remote
control receiver window on the main unit.
: Remote control wired terminal .................. (p. 18)
To use the wired output terminal, connect the
remote control and the main unit with the cable
(sold separately).
Note
•
The AUX button to switch the input is disabled when
an optional input module is not connected.
9
:
ENGLISH –
13