Panasonic Lumix DMC-FX48 Operating Instructions Manual page 60

Panasonic lumix dmc-fx48: user guide
Table of Contents

Advertisement

Advanced (Recording pictures)
Press 3/4 to select the item and then press [MENU/SET].
Item
[
] can be enjoyed on the TV as high quality motion picture by using the component
cable (DMW-HDC2; optional). Refer to
(P104) for details.
¢Cannot be recorded in the built-in memory.
Press [MENU/SET] to close the menu.
You can also press the shutter button halfway to close the menu.
Note
The flash setting is fixed to [Œ].
Refer to P122 for information about the available recording time.
The available recording time displayed on the screen may not decrease regularly.
Depending on the type of the card, the card access indication may appear for a while after
recording motion pictures. This is not a malfunction.
Motion pictures can be recorded continuously up to 2 GB. The maximum available recording
time for up to 2 GB only is displayed on the screen.
When motion pictures recorded with the camera are played back on other equipment, the
quality of the picture and sound may deteriorate and it may not be possible to play them back.
Also the recording information may not be displayed correctly.
Sound from motion pictures or pictures with audio recorded by this camera cannot be played
back by older models of Panasonic digital cameras (LUMIX) launched before July 2008.
In Motion picture mode, direction detection function cannot be used.
In the Motion picture mode, [AF MODE] is fixed to [
This unit does not support recording motion pictures on MultiMediaCards.
Compared to still pictures, motion pictures may have a narrow angle of view.
60
VQT1X57
Picture size
¢
1280k720 pixels
¢
848k480 pixels
¢
640k480 pixels
320k240 pixels
fps
30
30
30
30
"
Playing back on the TV with component socket
] and [STABILIZER] to [MODE1].
Aspect ratio
16:9
4:3
"

Advertisement

Table of Contents
loading

Table of Contents