Others
The recorded picture is too bright or dark.
> Check that the exposure is correctly compensated. (P47)
•
Setting the [MIN. SHTR SPEED] to faster speed might make the picture darker.
> Set the [MIN. SHTR SPEED] (P75) to slower speed.
2 or 3 pictures are taken at one time.
> Set Auto bracket (P48), [HI-SPEED BURST] (P55), [FLASH BURST] (P55) in Scene mode
or [BURST] (P73) of the [REC] mode menu to [OFF].
The subject is not focused properly.
•
The focus range varies depending on the Recording mode.
> Set to the proper mode for the distance to the subject.
•
The subject is beyond the focus range of the camera. (P32)
•
There is camera shake (jitter) or the subject is moving slightly. (P33)
The recorded picture is blurred.
The Optical image stabilizer is not effective.
> The shutter speed becomes slower when pictures are taken in dark places so hold the
camera firmly with both hands to take the pictures. (P28)
> When taking pictures at a slow shutter speed, use the self-timer. (P46)
Taking pictures using Auto bracket is not possible.
•
Is the number of recordable pictures 2 or less?
The recorded picture looks rough.
Noise appears on the picture.
•
Is the ISO sensitivity high or the shutter speed slow?
(ISO sensitivity is set to [AUTO] when the camera is shipped. Therefore, when taking pictures
indoors etc. noise will appear.)
> Decrease the ISO sensitivity. (P69)
> Set [COLOR MODE] to [NATURAL]. (P74)
> Take pictures in bright places.
•
Has [HIGH SENS.] or [HI-SPEED BURST] in the Scene mode been set? If so, the resolution of
the recorded picture decreases slightly because of high sensitivity processing, but this is not a
malfunction.
The brightness or the hue of the recorded picture is different from the actual
scene.
•
If recording under fluorescent light, the brightness or the hue may change slightly when the
shutter speed becomes fast. This occurs due to the characteristics of fluorescent light. It is not
a malfunction.
114
VQT1X57