Palm Treo 755P User Manual page 258

Synchronizing Over a Bluetooth Connection
1. Press Applications
2. Select Local.
3. Select the pick list below the HotSync icon, and then select
the name of the PC you set up for Bluetooth synchronization
(see "Setting Up a Bluetooth Connection for Synchronization"
on page 249).
4. Select the HotSync
When synchronization is complete, a message appears at the top of your device screen. Be
patient; synchronization may take a few minutes.
Synchronizing Over an Infrared Connection
When you synchronize using your device's IR port, you don't need your cable. This is
especially useful if you travel with an IR-enabled laptop.
To synchronize over an infrared connection, you must first do the following:
Turn on your computer's built-in IR port or external IR device. Check your computer's
documentation to see if the computer supports IR communication and to find out how
to enable this feature.
Make sure HotSync manager is active. On a Windows computer, you know HotSync
manager is active when its icon
250
and select HotSync
icon on your device.
appears in the lower-right corner of your screen.
.
Section 6A: Managing Files