Audio Delay - Marantz SR5005 User Manual

Manual EQ
Use the graphic equalizer to adjust the tone of each speaker.
"Manual EQ" can be set when "MultEQ ® " setting (vpage 53) is "Manual".
Setting items
Adjust CH q Select the speaker tone adjustment method.
Correct the tone of each
All CH : Adjust the tone of all speakers together.
speaker. L/R CH : Adjust the tone of left and right speakers together.
Each CH : Adjust the tone of each speaker.
w Select the speaker.
e Select the adjustment frequency band.
63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz
• Select the speakers you want to adjust when "L/R" or "Each" is
selected.
r Adjust the level.
–20.0dB – +6.0dB (0.0dB)
Base Curve Copy Yes : Copy.
Copy "Audyssey Flat" curve No : Do not copy.
from MultEQ.
"Base Curve Copy" is displayed after Audyssey Auto Setup has been
performed.
Default Yes : Reset to the defaults.
The "Manual EQ" settings No : Do not reset to the defaults.
are returned to the default
settings.
Remote control operation
buttons
SVENSKA SVENSKA NEDERLANDS NEDERLANDS
Default settings are underlined.
Setting details
Move the cursor
(Up/Down/Left/Right)
ESPAÑOL ESPAÑOL ITALIANO ITALIANO
M-DAX
Compressed audio formats such as MP3, WAV, WMA (Windows Media Audio) and MPEG-4 AAC reduce
the amount of data by eliminating signal components that are hard for the human ear to hear. The M-DAX
function generates the signals eliminated upon compression, restoring the sound to conditions near those
of the original sound before compression. It also corrects the sense of volume of the bass to obtain richer
sound with compressed audio signals.
OFF : Do not use M-DAX.
Low : Optimized mode for compressed sources with normal highs.
Mid : Apply suitable bass and treble boost for all compressed sources.
High : Optimized mode for compressed sources with very weak highs.
• This item can be set with analog signals or when a PCM signal (fs = 44.1/48
kHz) is input.
• This cannot be set when the surround mode is set to "DIRECT" or "PURE
DIRECT".
• When set to "OFF", the M-DAX indicator on the front panel switches off.
M-DAX
• This can also be set by pressing on the remote control unit.
M-DAX
Each time is pressed, the setting is changed as shown below.
OFF LOW
HIGH

Audio Delay

While viewing video, manually adjust the time to delay audio output.
0ms – 200ms
• This item can be set within the range of 0 to 200 ms when "Auto Lip Sync" is set
to "ON" and when a TV compatible with Auto Lip Sync is connected.
• Store "Audio Delay" for each input source.
• Audio Delay for game mode can be set when "Video Mode" (vpage 49) is set
to "Game".
• You can also adjust the time to delay audio output after pressing
by the o p on the remote control, instead of using the menu operation.
Confirm the setting
FRANÇAIS FRANÇAIS DEUTSCH DEUTSCH
Default settings are underlined.
Setting details
MID
Default settings are underlined.
Setting details
DLY
followed
Return to previous menu
ENGLISH ENGLISH
Audio Adjust
55