Audio Delay - Marantz SR6006 Owner's Manual

M-DAX
Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the
amount of data by eliminating signal components that are hard for the human ear to hear. The M-DAX
function generates the signals eliminated upon compression, restoring the sound to conditions near those
of the original sound before compression. It also corrects the sense of volume of the bass to obtain richer
sound with compressed audio signals.
OFF : Do not use M-DAX.
Low : Optimized mode for compressed sources with normal highs.
Middle : Apply suitable bass and treble boost for all compressed sources.
High : Optimized mode for compressed sources with very weak highs.
• This item can be set with analog signals or PCM signal (fs = 44.1/48 kHz) is input.
• "M-DAX" settings are stored for each input source.
• When set to "OFF", the M-DAX indicator on the front panel switches off.
• This cannot be set when the surround mode is set to "DIRECT" or "PURE
DIRECT".
• Buttons on the remote control unit can be used for operations.
AMP
q Press to set the remote control unit to AMP-operation mode.
M-DAX
w Press .
M-DAX
• If on the main unit is pressed, the same function as with the remote
control unit can be obtained.

Audio Delay

While viewing video, manually adjust the time to delay audio output.
0ms – 200ms
• This item can be set within the range of 0 to 100 ms when "Auto Lip Sync" (vpage 104) is set to
"ON" and when a TV compatible with Auto Lip Sync is connected.
• Store "Audio Delay" for each input source.
• Audio Delay for game mode can be set when "Video Mode"
"Game".
BD
Default settings are underlined.
Setting details
Default settings are underlined.
Setting details
(vpage 89) is set to "Auto" or
Picture Adjust
Picture quality can be adjusted.
• This item can be set when the input source is
NET/USB .
• With input sources other than the ones above, this item can be set when "Video Select" is selected. In
this case, the original input source settings are called out.
• Can be set when the "Video Convert" setting (vpage 90) is "ON".
• "GAME", "AUX2" or "TV" can be set when "HDMI"
been assigned.
Setting items
Contrast –6 – +6 (0)
Adjust picture contrast.
Brightness 0 – +12
Adjust picture brightness.
Chroma Level –6 – +6 (0)
Adjust picture chroma level
(saturation).
Hue –6 – +6 (0)
Adjust color hue.
DNR OFF / Low / Middle / High
Reduce overall picture
noise.
Enhancer 0 – +12
Emphasize picture contours.
• "DNR" and "Enhancer" are each effective with HDMI output.
• The value set at "Picture Adjust" is stored in the memory individually for each input source.
99
AUDIO/VIDEO ADJUST
Default settings are underlined.
BD DVD VCR SAT GAME AUX1
(vpage 88) or "COMP" (vpage
Setting details
AUX2
89) has