Load High Performance/Bios Setup Defaults - MSI KT6 Delta-FIS2R User Manual

MS-6590 ATX Mainboard

Load High Performance/BIOS Setup Defaults

The two options on the main menu allow users to restore all of the BIOS
settings to High Performance defaults or BIOS Setup defaults. The High Per-
formance Defaults are the values set by the mainboard manufacturer for the
best system performance but probably will cause a stability issue. The BIOS
Setup Defaults are the default values also set by the mainboard manufacturer
for stable performance of the mainboard.
When you select Load High Performance Defaults, a message as below
appears:
Pressing 'Enter' loads the default BIOS values that enable the best sys-
tem performance but may lead to a stability issue.
MSI Reminds You...
The option is for power or overclocking users only. Use of high
performance defaults will tighten most timings to increase the
system performance. Therefore, a high-end system configuration
is a must, which means you need high-quality VGA adapter,
RAM and so on. We don't recommend that users should apply
the high performance defaults in their regular systems.
Otherwise, the system may become unstable or even crash. If the
system crashes or hangs after enabling the feature, please CLEAR
CMOS DATA to resolve the problem. For more information, refer
to "Clear CMOS Jumper:JBAT1" in Chapter 2.
When you select Load BIOS Setup Defaults, a message as below appears:
Pressing 'Enter' loads the default values that are factory settings for
stable system performance.
3-30