Jumpers; Clear Cmos Jumper: Jbat1 - MSI K8T Neo2-F User Manual

The motherboard provides the following jumpers for you to set the computer's function.
This section will explain how to change your motherboard's function through the use
of jumpers.

Clear CMOS Jumper: JBAT1

There is a CMOS RAM on board that has a power supply from external battery to
keep the system configuration data. With the CMOS RAM, the system can automati-
cally boot OS every time it is turned on. If you want to clear the system configuration,
use the JBAT1 (Clear CMOS Jumper ) to clear data. Follow the instructions below to
clear the data:
MSI Reminds You...
You can clear CMOS by shorting 2-3 pin while the system is off.
Then return to 1-2 pin position. Avoid clearing the CMOS while the
system is on; it will damage the mainboard.

Jumpers

Keep Data
Hardware Setup
1
JBAT1
1
Clear Data
3
2-25