Jumpers - MSI MS-CF06 User Manual

Jumpers

⚠
Important
Avoid adjusting jumpers when the system is on; it will damage the motherboard.
Jumper Name
JCOMP1~2
JPCISEL_1~5
JCMOS1
JME_DIS1
JATX1
JCASE1
26
Jumpers
JCOMP2
Default Setting
COM Voltage Select Jumper
1
1-2: 5V Power (Default)
2-3: 12V Power
PCI Voltage Select Jumper
1
1-2: 5V (Default)
2-3: 3V
Clear CMOS Jumper
1
1-2: Normal (Default)
2-3: Clear CMOS
ME Jumper
1
1-2: ME enabled (Default)
2-3: ME disabled
AT/ ATX Mode Select Jumper
1-2: ATX (Default)
1
2-3: AT
Chassis Intrusion Jumper
This connector connects to the chassis intrusion
switch cable. If the chassis is opened, the chassis
intrusion mechanism will be activated. The
Normal
system will record this status and show a warning
(default)
message on the screen. To clear the warning, you
must enter the BIOS utility and clear the record.
JCOMP1
JPCISEL_1
JPCISEL_2
JPCISEL_3
JCMOS1
JPCISEL_4
JPCISEL_5
Description
JME_DIS1
JCASE1
JATX1