Kyocera KM-2560 Advanced Operation Manual page 250

System Menu
6-80
The Folder (FTP) Address
1
Press [Host Name], [Path], [Login User Name], and [Login
Password] to enter relevant information respectively and press [OK].
Item
Host name* FTP server host name or IP
address
Path** Path for the file to be stored
E.g.
If no path is entered, the file is
stored in the home directory.
Login user User name FTP server login
name
Login Password for FTP server login
password
* If you specify a port number other than the default (21), use the
"
Host name: port number
** Use single-byte alphanumeric characters to specify the path. If you
use Japanese (double-byte) characters, transmission will fail.
NOTE:
Refer to the Operation Guide for entering characters.
2
Check if the entries are correct and press [OK].
NOTE:
Press [Connection Test] to check the connection to the FTP
server you chose. If the connection fails, check the entries you made.
Description
" "
\User\ScanData
"
format. (E.g. FTPhostname:140)
Address - Folder Path Entry
SMB
Host Name
FTP
Path
Login
User Name
Login
Password
Status
ADVANCED OPERATION GUIDE
Max. No. of
Characters
62 chars
126 chars
62 chars
62 chars
Connection
Test
Cancel OK
10/10/2007 10:10