Kyocera KM-2560 Advanced Operation Manual page 193

ADVANCED OPERATION GUIDE
3
Select the default for
[Text+Photo], [Text]
or [Photo].
4
Press [OK].
Scan Resolution
Select the default scanning resolution. The options are 600x600dpi,
400x400dpi Ultra Fine, 300x300dpi, 200x400dpi Super Fine, 200x200dpi
Fine, 200x100dpi Normal.
Use the procedure below to select the default resolution setting.
1 Press the System Menu key.
2
Press [Common Settings], [Next] of Function Defaults and then [Change]
of Scan Resolution.
3 Select the default
resolution.
4 Press [OK].
Color Selection
Select the default scanning color setting. The available default settings are
shown below.
Color mode
Full Color
Grayscale
Common Settings - Original Image
Set the default original document type.
Text
Text+Photo
Status
Common Settings - Scan Resolution
Select default scan resolution.
600x600dpi 400x400dpi 300x300dpi
Ultra Fine
200x100dpi
Normal
Status
Description
Scan document in full color.
Scan document in grayscale for smoother
and finer finish.
System Menu
Photo
Cancel OK
10/10/2007 10 :10
200x400dpi 200x200dpi
Super Fine Fine
Cancel OK
10/10/2007 10 :10
6-23
6