Kyocera KM-2560 Advanced Operation Manual page 175

Sound
ADVANCED OPERATION GUIDE
Set options for buzzer sound during the machine operations.
The table below lists the buzzer types and their settings and details.
Item
Volume 0 (Mute), 1 (Minimum)
to
5 (Maximum)
Key Off, On
Confirmation
Job Finish Off, On
Ready Off, On
Warning Off, On
Use the procedure below to set the sound options.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Sound and then [Next] of Buzzer.
3 Press [Change] of
Volume, Key
Confirmation, Job
Finish, Ready, or
Warning.
4 Select the buzzer volume level, or other sound options.
5
Press [Close].
Value
Set the buzzer volume
level.
Emit a sound when the
control panel and touch
panel keys are pressed.
Emit a sound when a print
job is normally completed.
Emit a sound when the
warm-up is completed.
Emit a sound when errors
occur.
Common Settings - Buzzer
Change
Volume: Key Confirmation:
3 Medium
Job Finish: Change Ready :
Off
Change
Warning:
Off
End
System Menu
Description
Change
Off
Change
On
Return to Top Close
10/10/2007 10:10
6-5
6