4.3.17 AGP cards
To install an AGP card:
1. Lift the PCI levers 1 by first pressing down on them and then out.
2. Lift and remove the PCI slot cover 2 directly behind the AGP socket.
3. Insert the AGP card 3 into the AGP socket.
4. Close the PCI levers 4.
5. To remove an AGP card, open the PCI levers 1 by first pressing down and then out.
6. Press in on the AGP socket release latch 2 as shown in the following illustration.
7. Lift the AGP card 3 out of the socket.
hp workstation xw4100 service and technical reference guide
removal and replacement procedures
4–19