Using Computer Setup (F10) Utilities - HP Pro 3005 MT Maintenance And Service Manual

Using Computer Setup (F10) Utilities

Computer Setup can be accessed only by turning the computer on or restarting the system.
To access the Computer Setup Utilities menu, complete the following steps:
1. Turn on or restart the computer.
2. As soon as the computer is turned on, press
system to enter Computer Setup. Press
NOTE:
again press
3. The Computer Setup Utility screen is divided into menu headings and actions.
Five menu headings appear on the Computer Setup Utility screen:
●
Main
●
Advanced
●
Boot
●
Power
●
Exit
Use the arrow keys to select the appropriate heading, then press Enter. Use the arrow (up and
down) keys to select the option you want, then press Enter. To return to the previous screen,
press Esc.
4. To apply and save changes, press the
If you have made changes that you do not want applied, press the
previous values.
To load optimized default values, press the
CAUTION:
(F10) changes because the CMOS could become corrupted. It is safe to turn off the computer only
after exiting the F10 Setup screen.
Table 3-8 Computer Setup (F10) Utility Main Menu
Heading
Main
Advanced
Boot
Power
Exit
If you do not press F10
F10 before the unit boots to the operating system to access the utility.
Do NOT turn the computer power OFF while the ROM is saving the Computer Setup
F10 before the system boots to the operating
Enter to bypass the title screen, if necessary.
at the appropriate time, you must restart the computer and
F10 key.
F7 key.
Table
Computer Setup—Main on page 11
Computer Setup—Advanced on page 13
Computer Setup—Boot on page 14
Computer Setup—PC Health on page 15
Computer Setup—Exit on page 21
HP Pro 3015 – Computer Setup (F10) Utility
F5 key to return to the
17