HP Pro 3005 MT Maintenance And Service Manual page 137

Table D-2 Specifications – HP Pro 3015 (continued)
Typical (idle)
Power Supply
Operating Voltage Range
Rated Voltage Range
Rated Line Frequency
Power Output
Rated Input Current (maximum)
This system utilizes a passive power factor corrected power supply. The power factor correction is present in the 230V
1
operating mode only. This allows the system to pass the CE mark requirements for use in the countries of the European
Union. This supply requires the use of an input voltage range select switch.
For 115V/60Mhz
250W PFC HV ATX:
48.5 W or 165.482 BTU/hr.
300W PFC HV ATX:
50.4W or 171.9648 BTU/hr.
300W NPFC ATX:
51.8W or 176.7416 BTU/hr.
300W 85% EFF ATX:
43.1W or 147.0572BTU/hr.
250W PFC HV TFX:
51.9W or 177.0828 BTU/hr.
250W PFC TFX:
52.8W or 180.1536 BTU/hr.
115V
90-132 VAC
100-127 VAC
50-60 Hz
300 W
8A @ 100 VAC
1
For 230V/50Hz
250W PFC HV ATX:
48.2 W or 164.4584 BTU/hr.
300W PFC HV ATX:
50.3W or 171.6236 BTU/hr.
300W NPFC ATX:
52W or 177.424 BTU/hr.
300W 85% EFF ATX:
43.2W or 147.3984 BTU/hr.
250W PFC HV TFX:
51.4W or 175.3768 BTU/hr.
250W PFC TFX:
53.3W or 181.8596 BTU/hr.
230V
180-264 VAC
200-240 VAC
50-60 Hz
300 W
4A @ 200 VAC
HP Pro 3015 129