System Error Messages - HP Compaq d330 DT Technical Reference Manual

A.4 SYSTEM ERROR MESSAGES (1xx-xx)
Table A–3. System Error Messages
Message Probable Cause
101 Option ROM error
102 System board failure
103 System board failure
104-01 Master int. cntlr. test fialed
104-02 Slave int. cntlr. test failed
104-03 Int. cntlr. SW RTC inoperative
105-01 Port 61 bit <6> not at zero
105-02 Port 61 bit <5> not at zero
105-03 Port 61 bit <3> not at zero
105-04 Port 61 bit <1> not at zero
105-05 Port 61 bit <0> not at zero
105-06 Port 61 bit <5> not at one
105-07 Port 61 bit <3> not at one
105-08 Port 61 bit <1> not at one
105-09 Port 61 bit <0> not at one
105-10 Port 61 I/O test failed
105-11 Port 61 bit <7> not at zero
105-12 Port 61 bit <2> not at zero
105-13 No int. generated by failsafe timer
105-14 NMI not triggered by failsafe timer
106-01 Keyboard controller test failed
107-01 CMOS RAM test failed
108-02 CMOS interrupt test failed
108-03 CMOS not properly initialized (int.test)
109-01 CMOS clock load data test failed
109-02 CMOS clock rollover test failed
109-03 CMOS not properly initialized (clk test)
NOTE: A 102 message code may be caused by one of a variety of processor-related problems
that may be solved by replacing the processor, although system board replacement may be needed.
Table A-3.

System Error Messages

Message
110-01
(see note) 110-02
110-03
111-01
112-01
112-02
112-03
112-04
112-05
112-06
112-07
112-08
112-09
112-10
112-11
112-12
113-01
114-01
116-xx
162-xx
163-xx
164-xx
199-00
hp/Compaq Personal Computers
Changed – April 2003
Technical Reference Guide
Probable Cause
Programmable timer load data test failed
Programmable timer dynamic test failed
Program timer 2 load data test failed
Refresh detect test failed
Speed test Slow mode out of range
Speed test Mixed mode out of range
Speed test Fast mode out of range
Speed test unable to enter Slow mode
Speed test unable to enter Mixed mode
Speed test unable to enter Fast mode
Speed test system error
Unable to enter Auto mode in speed test
Unable to enter High mode in speed test
Speed test High mode out of range
Speed test Auto mode out of range
Speed test variable speed mode inop.
Protected mode test failed
Speaker test failed
Way 0 read/write test failed
Sys. options failed (mismatch in drive type)
Time and date not set
Memory size
Installed devices test failed
A-3