System Board - HP 510 Maintenance And Service Manual

System board

Description
For use only with full-featured computer models
For use only with defeatured computer models with wireless LAN capability
For use only with defeatured computer models without wireless LAN capability
When replacing the system board, be sure that the following components are removed from the defective
system board and installed on the replacement system board:
●
Memory module (see
●
Mini PCI card module (see
●
RTC battery (see
●
Processor (see
●
PC Card assembly (see
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power cord.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Memory/Mini PCI card module compartment cover (see
c. Optical drive (see
d. Switch cover (see
e. Keyboard (see
f. Display assembly (see
g. Base enclosure (see
h. Fan assembly (see
i. Heat sink (see
58 Chapter 5 Removal and replacement procedures
Memory module on page
Mini PCI card module on page
RTC battery on page
Processor on page 55)
PC Card assembly on page
Battery on page
Hard drive on page
Optical drive on page
Switch cover on page
Keyboard on page
Display assembly on page
Base enclosure on page
Fan assembly on page
Heat sink on page
32)
34)
51)
61)
29).
30)
Memory module on page
36)
38)
40)
44)
49)
52)
53)
Spare part number
441635-001
441636-001
441637-001
32)
ENWW