Grizzly G3616 Owner's Manual page 39

Right Side of Machine (Figures 55–57):
I.
Column/Knee Intersection
J. Cross Ways (Under Table)
K. Table rotation (Front and Back)
L. Quill Feed
M. Horizontal Spindle (G3617 Only)
K
J
Figure 55 . Right side of mill, under table.
Figure 56 . Horizontal spindle.
G3616/G3617 Mill
Leadscrews
I
Directly apply a small amount of all-purpose
grease to all of the lead sccrew, and move the
attached part all the way through its full range of
motion on the leadscrew.
M
L
Figure 57 . Quill handwheel.
37