Section 5: Accessories - Grizzly G3616 Owner's Manual

SECTION 5: ACCESSORIES

H2689—R-8 Quick Change Collet Set
An affordable quick change collet system with
ultra precision. These spring collets are hard-
ened and ground to exacting tolerances and offer
incredible holding power. This set includes an R-8
arbor and nut, spanner wrench, plastic carrying
case and collets sized
1
and 1". What's more, the nut features a self-eject-
ing rim! A set like this will truly speed up any tool
changing process. Drawbar size is
Figure 37. H2689 R-8 Quick Change Collet Set.
G9299—10" Yuasa-Type Rotary Table
This high precision rotary table features extra
deep coolant channels, dual positive action locks,
very low profiles, 10 second vernier scales, gear
drives with oil immersion and satin chrome dials.
See the current Grizzly catalog for full specifica-
tions. Features: 4.330" overall height (horizontal),
6.750" height to center hole (vertical), #3 Morse
Taper, 0.465" T-slot width, and 117 lb approximate
shipping weight.
Figure 38. G9299 10" Yuasa-Type Rotary
Table.
32
⁄ ", ⁄ ", ⁄ ", ⁄ ", ⁄ ", ⁄ ",
1 3 1 5 3 7
8 4 8 2 8 4
⁄ " x 20.
7
16
G1076—52-PC. Clamping Kit
This clamping kit includes 24 studs, 6 step block
pairs, 6 T-nuts, 6 flange nuts, 4 coupling nuts, and
6 end hold-downs. The rack is slotted so it can be
mounted close to the machine for easy access.
⁄ ",
8
Figure 39. G1076 52-PC. Clamping Kit.
G9324—Boring Head Combo Set
Hardened and ground adjusting screws along
with a wide base design guarantee a long life and
trouble-free use. Includes a 3" boring head, R-8
shank with 1 /
1
bar set.
Figure 40. G9324 Boring Head Combo Set.
"-18 TPI, and a 12 piece
2
G3616/G3617 Mill
/ " boring
3
4