Sequential/Loop Playback - Go-Video DDV9558 User Manual

Sequential/Loop Playback

You can insert two tapes in
your Dual-Deck VCR and have
them play sequentially or in a
continuous loop. For example,
you may rent a movie that
comes on two videotapes and
watch them seamlessly one
after the other. You may also
set two sales or training tapes
to play in a continuous loop.
44 - '
DUAL DECK USER S GUIDE
1
Open "Setup Menu"
Press Menu on the remote control, then
press 4 to open the "Setup Menu."
2
Select "Dual-Deck Features"
Press 4.
3
Set "Playback Mode"
Press 2 to select from the following options:
• Normal — Tapes play normally (default
setting).
• Seq (Sequential) — When the tape in
Deck 1 finishes playing, the tape in Deck
2 will begin playing automatically.
• Loop — When the tape in Deck 1 finishes
playing, the tape in Deck 2 will begin
playing automatically and Deck 1 will
rewind. When the tape in Deck 2 finishes
playing, the tape in Deck 1 will play
again. This process will repeat continu-
ously until you press Stop on the deck in
Play.