If you know a station in your
area that broadcasts time
information, you can set the
Auto Clock Set Channel
manually. For example, your
local PBS station will usually
transmit the time and date. Use
this feature only if Auto Clock
Set has set the time incorrectly.
1
Open the "Set Clock Menu"
Press Set Clock on the remote control.
2
Select "Clock Set Channel"
Press the down arrow key until "Clock Set
Channel" is selected. Note: Make sure Auto
Clock Set is set to "On" or Clock Set Chan-
nel will not be listed.
3
Set "Clock Set Channel"
Press the right arrow key to select one of the
following options:
• Auto — Automatically searches for a
local channel broadcasting the time via
XDS (Extended Data Services)
• Ch ## — Allows you to manually set a
channel which you know to receive XDS
information. Use the 0-9 keys to set the
desired channel.
• Line 1/Line 2 — Allows the clock to be
set from another AV (Audio/Video)
device attached to your VCR's front
(Line 1) or rear (Line 2) inputs.
Set Auto Clock Set Channel
11
2 - INITIAL SETTINGS