Table of Contents
Advertisement
Frequency/Voltage Control
CMOS Setup Utility-Copyright (C) 1984-2003 Award Software
Auto Detect PCI/DIMM CLK
CPU Clock
CPU Voltage Control
Normal CPU Vcore
AGP OverVoltage Control
DIMM OverVoltage Control
: Move
Enter:Select +/-/PU/PD:Value F10:Save
F5:Previous Values
Auto Detect PCI/DIMM CLK
Enabled
Disabled
CPU Clock
200MHz ~255MHz
CPU Voltage Control
Supports adjustable CPU Vcore from +5.0% to +10.0%.
(Default value: Normal)
Incorrect using it may cause your system broken. For power End-User use only!
AGP OverVoltage Control
Normal
+0.1V
+0.2V
+0.3V
Incorrect using it may cause your system broken. For power End-User use only!
Frequency/Voltage Control
F6:Fail-Safe Defaults
Figure 8: Frequency/Voltage Control
Enable PCI/DIMM clock auto-detection function. (Default value)
Disable this function.
Set CPU Host Clock from 200MHz to 255MHz.
Set AGP OverVoltage Control to Normal. (Default value)
Set AGP OverVoltage Control to +0.1V.
Set AGP OverVoltage Control to +0.2V.
Set AGP OverVoltage Control to +0.3V.
- 57 -
[Enabled]
Item Help
[200MHz]
Menu Level
[Normal]
1.550V
[Auto]
[Auto]
ESC:Exit
F7:Optimized Defaults
F1:General Help
BIOS Setup
Advertisement
Table of Contents
