Troubleshooting A Tcp/Ip Network Using A Ping Utility; Testing The Lan Path To Your Router - NETGEAR RP614 - Web Safe Router Reference Manual

Web safe router
Hide thumbs Also See for RP614 - Web Safe Router:
Table of Contents

Advertisement

OR
Configure your router to spoof your PC's MAC address. This can be done in the Basic Settings
menu. Refer to
"Manually Configuring Your Internet Connection" on page
If your router can obtain an IP address, but your PC is unable to load any web pages from the
Internet:
Your PC may not recognize any DNS server addresses.
A DNS server is a host on the Internet that translates Internet names (such as www addresses)
to numeric IP addresses. Typically your ISP will provide the addresses of one or two DNS
servers for your use. If you entered a DNS address during the router's configuration, reboot
your PC and verify the DNS address as described in
4-5. Alternatively, you may configure your PC manually with DNS addresses, as explained in
your operating system documentation.
Your PC may not have the router configured as its TCP/IP gateway.
If your PC obtains its information from the router by DHCP, reboot the PC and verify the
gateway address as described in

Troubleshooting a TCP/IP Network Using a Ping Utility

Most TCP/IP terminal devices and routers contain a ping utility that sends an echo request packet
to the designated device. The device then responds with an echo reply. Troubleshooting a TCP/IP
network is made very easy by using the ping utility in your PC or workstation.

Testing the LAN Path to Your Router

You can ping the router from your PC to verify that the LAN path to your router is set up correctly.
To ping the router from a PC running Windows 95 or later:
From the Windows toolbar, click on the Start button and select Run.
1.
In the field provided, type Ping followed by the IP address of the router, as in this example:
2.
ping 192.168.0.1
Click on OK.
3.
You should see a message like this one:
Pinging <IP address> with 32 bytes of data
Troubleshooting
Reference Manual for the Model RP614 v2 Web Safe Router
"Verifying TCP/IP Properties" on page
"Verifying TCP/IP Properties" on page
2-16.
4-5.
6-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rp614naRp614narRp614 v2

Table of Contents