The Router's Front Panel - NETGEAR RP614 - Web Safe Router Reference Manual

The Router's Front Panel

The front panel of the Model RP614 v2 Web Safe Router
Figure 1-1: RP614 Front Panel
You can use some of the LEDs to verify connections. Viewed from left to right,
the LEDs on the front panel of the router. These LEDs are green when lit.
Table 2. LED Descriptions
Label Activity
On
Off
Power
On
Off
Test
On (Green)
Blink (Green)
On (Amber)
Blink (Amber)
Off
Internet
On (Green)
Blink (Green)
On (Amber)
Blink (Amber)
Off
Local
Introduction
Reference Manual for the Model RP614 v2 Web Safe Router
Description
Power is supplied to the router.
Power is not supplied to the router.
The system is initializing.
The system is ready and running.
The Internet (WAN) port has detected a 100 Mbps link with an attached device.
Data is being transmitted or received by the Internet port.
The Internet (WAN) port has detected a 10 Mbps link with an attached device.
Data is being transmitted or received by the Internet port.
The Internet (WAN) port in not connected or the electric power to the device to
which it is connected is turned off.
The Local (LAN) port has detected link with a 100 Mbps device.
Data is being transmitted or received at 100 Mbps.
The Local port has detected link with a 10 Mbps device.
Data is being transmitted or received at 10 Mbps.
No link is detected on this port.
(Figure 1-1) contains status LEDs.
Table 2 describes
1-5