Fixed Ip Account Wizard-Detected Option - NETGEAR RP614 - Web Safe Router Reference Manual

Fixed IP Account Wizard-Detected Option

If the Setup Wizard discovers that your ISP uses Fixed IP assignment, you will see this menu:
Figure 2-15: Setup Wizard menu for Fixed IP address accounts
• Fixed IP is also called Static IP. Enter your assigned IP Address, Subnet Mask, and the IP
Address of your ISP's gateway router. This information should have been provided to you by
your ISP. You will need the configuration parameters from your ISP you recorded in
"Worksheet to Record Your Internet Connection Information" on page
• Enter the IP address of your ISP's Primary and Secondary DNS Server addresses.
Note: Restart the computers on your network so that these settings take effect.
• Click Apply to save the settings.
• Click Test to test your Internet connection. If the NETGEAR website does not appear within
one minute, refer to
Connecting the Router to the Internet
Reference Manual for the Model RP614 v2 Web Safe Router
Chapter 6, "Troubleshooting."
2-3.
2-15