HP J4813A User Manual page 95

a. Select the Location where the global rule will be applied, or "
b. Select the Time when the global rule will be used, or "
Select the System where the global rule will be used, or "
c.
d. In the Access Profile field, select the access profile where the global
rule will be used.
If Endpoint integrity is enabled, select the option that indicates when
e.
the rule will be applied, relative to the endpoint integrity status (
Fail Any
, or )
3. Click Ok to save your changes and close the
4. The new global rule appears in the
5. Similar to access rules, the global rules are evaluated in the order they are
listed in the Global Rules table. Use the
the toolbar to arrange the rules in the order you want them to be applied.
IDM checks each rule in the list until a match on all parameters is found,
then applies the matching rule.
Changing Global Rules
To edit Global Rules:
1. Navigate to the Global Rules window.
2. Select the rule you want to modify in the
Edit Global Rule
3. Click the
4. Change the desired values, as explained for New Global Rule (on the
previous page).
Click Ok to save the changes and close the
5.
To delete a Global Rule:
1. Navigate to the Global Rules window.
2. Select the rule you want to delete in the
Delete Global Rule
3. Click the
4. Click Yes in the confirmation pop-up to complete the process.
The rule is removed from the Global Rules list.
New Global Rule
Global Rules
Move Up
Rules
Edit Global Rules
icon to display the
Edit Global Rules
Rules
list.
icon in the toolbar.
Using Identity Driven Manager
Configuring User Access
ANY
".
ANY
".
ANY
"
Pass
window
list.
Move Down
or button in
list.
window.
window.
,
3-41