HP J4813A User Manual page 61

Enter the Device to be added using the Device Selection pull-downs, or
5.
select the Manually enter device address option.
Device Selection
Using the
a. Select a device group using the pull-down menu. This will enable the
Select Device
pull-down menu in the next field.
b. Select a device from the pull-down list of available devices. The list
is populated with the IP address or DNS name for all (PCM managed)
devices in the selected group.
Manually enter device address
Using the
a. Click the check box to enable the data entry field below it.
b. Type in the IP address or DNS name of the device to be added.
Use the Port Selection to define the ports on the device that will be
6.
associated with the location.
• Click to select Any port on the switch, or
Click Select ports, then use the pull down lists to select the Begin and
•
End ports on the device that will be associated with the new location.
If you manually entered the device address, the
pull-down menus are disabled, and you must manually enter the ports.
Click Ok to save the New Device settings to the Location, and close the
7.
window.
Using Identity Driven Manager
option:
option:
Configuring Locations
Begin port nd port
and E
3-7