HP J4813A User Manual page 84

Using Identity Driven Manager
Configuring Access Profiles
N O T E :
N O T E :
3-30
When modifying Access Profiles, make sure the appropriate VLANs are con-
figured on the network and at the switch. If you Modify the VLAN attribute in
an Access Profile that is currently used in an Access Policy Group rule, IDM
will check that the VLAN exists. If not, an error message is displayed.
Deleting an Access Profile
To remove an existing Access Profile:
Access Profiles
1. Click the
navigation tree to display the Access Profiles window.
2. Click on an Access Profile in the list to select it.
Delete Access Profile
3. Click on the
The first time you use the Delete option, a warning pop-up is displayed.
Click Ok to continue, or
Before you modify or delete an Access Profile, make sure that your changes
will not adversely affect users in Access Policy Groups where the profile is
used.
Identity Management Configuration
node in the
icon in the toolbar to remove it.
Cancel
to stop the delete process.