Installing The Switch Without The Rack; Installing The Switch In A Rack - D-Link xStack DES-3528P Hardware Installation Manual

Layer 2 managed stackable fast ethernet switch

Hide thumbs Also See for xStack DES-3528P:

Table of Contents

xStack

DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual

Installing the Switch without the Rack

When installing the Switch on a desktop or shelf, the rubber feet included with the Switch should first be attached.

Attach these cushioning feet on the bottom at each corner of the device. Allow enough ventilation space between the

Switch and any other objects in the vicinity.

Figure 2- 1. Preparing the Switch for installation on a desktop or shelf

The Switch can be mounted in a standard 19" rack. Use the following diagrams to guide you.

Figure 2- 2. Fasten mounting brackets to the Switch

Fasten the mounting brackets to the Switch using the screws provided. With the brackets attached securely, you can

mount the Switch in a standard rack as shown in Figure 2-3 below.

Table of Contents

Xstack des-3552