Displaying Etherchannel, Pagp, And Lacp Status - Cisco WS-C3560-48PS-S Software Configuration Manual

Displaying EtherChannel, PAgP, and LACP Status

Displaying EtherChannel, PAgP, and LACP Status
To display EtherChannel, PAgP, and LACP status information, use the privileged EXEC commands
described in
Table 29-4 Commands for Displaying EtherChannel, PAgP , and LACP Status
Command
show etherchannel [channel-group-number {detail |
port | port-channel | protocol | summary}] {detail |
load-balance | port | port-channel | protocol |
summary}
show pagp [channel-group-number] {counters |
internal | neighbor}
show lacp [channel-group-number] {counters |
internal | neighbor}
You can clear PAgP channel-group information and traffic counters by using the clear pagp
{channel-group-number counters | counters} privileged EXEC command.
You can clear LACP channel-group information and traffic counters by using the clear lacp
{channel-group-number counters | counters} privileged EXEC command.
For detailed information about the fields in the displays, refer to the command reference for this release.
Catalyst 3560 Switch Software Configuration Guide
29-20
Table 29-4:
Description
Displays EtherChannel information in a brief, detailed, and
one-line summary form. Also displays the load-balance or
frame-distribution scheme, port, port-channel, and protocol
information.
Displays PAgP information such as traffic information, the
internal PAgP configuration, and neighbor information.
Displays LACP information such as traffic information, the
internal LACP configuration, and neighbor information.
Chapter 29 Configuring EtherChannels
78-16156-01