Monitoring Vtp - Cisco WS-C3560-48PS-S Software Configuration Manual

Software configuration guide
Hide thumbs Also See for WS-C3560-48PS-S:
Table of Contents

Advertisement

Chapter 13
Configuring VTP
Command
Step 3
vtp domain domain-name
Step 4
end
Step 5
show vtp status
Step 6
configure terminal
Step 7
vtp domain domain-name
Step 8
end
Step 9
show vtp status
You can also change the VTP domain name by entering the vlan database privileged EXEC command
to enter VLAN database configuration mode and by entering the vtp domain domain-name command.
In this mode, you must enter the exit command to update VLAN information and return to privileged
EXEC mode.
After resetting the configuration revision number, add the switch to the VTP domain.
Note
You can use the vtp mode transparent global configuration command or the vtp transparent VLAN
database configuration command to disable VTP on the switch, and then change its VLAN information
without affecting the other switches in the VTP domain.

Monitoring VTP

You monitor VTP by displaying VTP configuration information: the domain name, the current VTP
revision, and the number of VLANs. You can also display statistics about the advertisements sent and
received by the switch.
Table 13-3
Table 13-3 VTP Monitoring Commands
Command
show vtp status
show vtp counters
78-16156-01
Purpose
Change the domain name from the original one displayed in Step 1 to a new name.
The VLAN information on the switch is updated and the configuration revision
number is reset to 0. You return to privileged EXEC mode.
Verify that the configuration revision number has been reset to 0.
Enter global configuration mode.
Enter the original domain name on the switch.
The VLAN information on the switch is updated, and you return to privileged EXEC
mode.
(Optional) Verify that the domain name is the same as in Step 1 and that the
configuration revision number is 0.
shows the privileged EXEC commands for monitoring VTP activity.
Purpose
Display the VTP switch configuration information.
Display counters about VTP messages that have been sent and received.
Catalyst 3560 Switch Software Configuration Guide
Monitoring VTP
13-15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents