Cisco ME-C6524GS-8S Installation Manual page 67

Chapter 4 Removal and Replacement Procedures
Figure 4-5
1 SP DRAM DIMM and socket
Release the old DRAM DIMM from its socket by simultaneously bending the locking spring tab on each
Step 6
side of the socket outward and then pivot the DRAM DIMM up away from the tabs. Be careful not to
bend the locking spring tabs too far, because you can break them. (See
OL-8900-03
Location of SP and RP DRAM DIMMs
rear
front
2 RP DRAM DIMM and socket
Figure
Cisco ME 6500 Series Ethernet Switch Installation Guide
Upgrading the Memory
1
2
4-6.)
4-11