Cisco ME 6524 Ethernet Switch (ME-C6524GT-8S)
Table 1-3
Cisco ME 6524 Ethernet Switch (ME-C6524GT-8S) Features (continued)
Feature
Chassis front panel features
STATUS LED
PS1 (Power supply 1) LED
PS2 (Power supply 2) LED
FAN
RESET switch
Console port
USB ports
PCMCIA connector
Cisco ME 6500 Series Ethernet Switch Installation Guide
1-10
Description
The STATUS LED indicates the system health.
Green—The system is operating normally.
•
Red—A fault has been detected in the system.
•
Amber—System is booting up.
•
•
Off—The system is not powered up.
The PS1 LED indicates the status of the power supply installed in power
supply bay 1.
•
Green—Power supply is on and the input and output voltages are OK.
Red—The power supply has a fault.
•
Off—The power supply is off or is not installed.
•
The PS2 LED indicates the status of the power supply installed in power
supply bay 2.
Green—Power supply is on and the input and output voltages are OK.
•
Red—The power supply has a fault.
•
Off—The power supply is off or is not installed.
•
The FAN LED indicates the status of the individual fans in the fan tray.
Green—Fan tray is operating normally.
•
•
Red—One or more individual fans in the fan tray have failed.
A recessed switch allows the user to reset the system.
A single console port allows the user access to the command-line interface.
The console port has an RJ-45 connector.
The switch has two USB ports:
Port 1 is a device port with a Type B USB connector. A standard
•
USB 1.1 host, such as a PC, can plug into this port.
Port 2 is a host port with a Type A USB connector. A standard USB 1.1
•
device, such as flash memory, can plug into this port.
Type 2 CompactFlash devices can be plugged into this connector.
Chapter 1
Product Overview
OL-8900-03