Cisco ME-C6524GS-8S Installation Manual page 43

Chapter 3 Installing the Switch
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special
Warning
precautions to ensure that the system remains stable. The following guidelines are provided to
ensure your safety:
• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest
component at the bottom of the rack.
•
If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in
the rack.
This unit is intended for installation in restricted access areas. A restricted access area is where
Warning
access can only be gained by service personnel through the use of a special tool, lock and key, or
other means of security, and is controlled by the authority responsible for the location. Statement 37
Ethernet cables must be shielded when used in a central office environment. Statement 171
Warning
Avoid direct exposure to the laser beam. Statement 1012
Warning
Warning Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into
beams or view directly with optical instruments. Statement 1051
OL-8900-03
Statement 1006
Cisco ME 6500 Series Ethernet Switch Installation Guide
Preparing for Installation
3-3