Cisco CISCO851-K9 - 851 Integrated Services Router Configuration Manual page 26

Configuring Basic Parameters
Command
Step 3
login
Example:
Router(config)# login
Router(config)#
Step 4
exec-timeout minutes [seconds]
Example:
Router(config)# exec-timeout 5 30
Router(config)#
Step 5 line [aux | console | tty | vty] line-number
Example:
Router(config)# line vty 0 4
Router(config)#
Step 6 password password
Example:
Router(config)# password aldf2ad1
Router(config)#
Step 7
login
Example:
Router(config)# login
Router(config)#
Step 8
end
Example:
Router(config)# end
Router#
For complete information about the command line commands, see the Cisco IOS Release 12.3
documentation set.
Cisco 850 Series and Cisco 870 Series Access Routers Software Configuration Guide
1-10
Chapter 1
Purpose
Enables password checking at terminal session
login.
Sets the interval that the EXEC command
interpreter waits until user input is detected. The
default is 10 minutes. Optionally, add seconds to
the interval value.
This example shows a timeout of 5 minutes and
30 seconds. Entering a timeout of 0 0 specifies
never to time out.
Specifies a virtual terminal for remote console
access.
Specifies a unique password for the virtual
terminal line.
Enables password checking at the virtual terminal
session login.
Exits line configuration mode, and returns to
privileged EXEC mode.
Basic Router Configuration
OL-5332-01