Basic Router Configuration; Interface Port Labels - Cisco CISCO851-K9 - 851 Integrated Services Router Configuration Manual

Basic Router Configuration

This chapter provides procedures for configuring the basic parameters of your Cisco router, including
global parameter settings, routing protocols, interfaces, and command-line access. It also describes the
default configuration on startup.
Note Individual router models may not support every feature described throughout this guide. Features not
supported by a particular router are indicated whenever possible.
This chapter contains the following sections:
•
•
•
•
•
•
•
Each section includes a configuration example and verification steps, as available.
For complete information on how to access global configuration mode, see the
Configuration Mode"
commands used in the following tables, see the Cisco IOS Release 12.3 documentation set.

Interface Port Labels

Table 1-1
Table 1-1
Router
Cisco 851
OL-5332-01
Interface Port Labels
Viewing the Default Configuration
Information Needed for Configuration
Configuring Basic Parameters
Configuring Static Routes
Configuring Dynamic Routes
Configuring Enhanced IGRP
section in Appendix A, "Cisco IOS Basic Skills." For more information on the
lists the interfaces supported for each router and their associated port labels on the equipment.
Supported Interfaces and Associated Port Labels by Cisco Router
Interface
Fast Ethernet LAN
Fast Ethernet WAN
Wireless LAN
Cisco 850 Series and Cisco 870 Series Access Routers Software Configuration Guide
C H A P T E R
"Entering Global
Port Label
LAN (top), FE0–FE3 (bottom)
WAN (top), FE4 (bottom)
(no label)
1
1-1