Casio FX-7400GII - SOFTWARE VERSION 2-00 User Manual page 259

Using the JUMP Command to Move the Cell Cursor
To move the cell cursor to here:
A particular cell
Line 1 of the current column
Column A of the current row
Last line of the current column
Column Z of the current row
To select a range of cells
1. Move the cell cursor to the start point of the range of cells you want to select.
• You could select and entire row or column of cells as the start point, if you want. For details
about selecting cells, see "To select cells" on page 9-4.
2. Press (CLIP).
• This will change the cell cursor to a thick-line boundary instead of the normal highlighting.
3. Use the cursor keys to move the cell cursor to the end
point of the range of cells you want to select.
• The edit box will show the range of the selected cells.
• To cancel cell selection, press
cursor will be located at the end point of the range you
selected.
Data (Constants, Text, Formula) Input Basics
First let's have a look at a few basic procedures that apply regardless of the type of data you
are inputting.
To overwrite data currently in a cell with new data
1. Move the cell cursor to the cell where you want to input data.
• If the cell you select already contains data, the following step will overwrite the existing
data with new input.
2. Use the calculator's keys to input data.
• As you perform key operations to input values or text
(such as ,
will appear aligned left inside the edit box.
• To cancel an input operation part way through at any
point before advancing to step 3 below, press
will return the cell contents to what they were in step 1
of this procedure.
3. To finalize and apply your input, press
Do this:
1. Press
2. On the dialog box that appears, enter the name
of the cell (A1 to Z999) to which you want to
jump.
3. Press
Press
Press
Press
Press
. If you do, the cell
(B), etc.), the applicable figures
.
9-5
(EDIT) (JUMP)
.
(EDIT) (JUMP)
(EDIT) (JUMP)
(EDIT) (JUMP)
(EDIT) (JUMP)
. This
(GO).
(TOP ).
(TOP ).
(BOT ).
(BOT ).