Casio FX-7400GII - SOFTWARE VERSION 2-00 User Manual page 304

Copying Data
Important!
• Data copy is not supported on an fx-7400G
To copy from main memory to storage memory
Note
• The following procedure saves the selected data into a single file. You assign a name to the
file, which is stored in storage memory.
1. On the main memory data information screen, select the data you want to copy.
2. Press (COPY).
• This displays the storage memory/SD card selection
screen (fx-9860G
3. Press to select storage memory (fx-9860G
2
only).*
• This displays the folder selection screen.
4. Select the folder to which you want to copy the data.
• This displays the file name input screen.
5. Input the file name you want to give to the file.
• To cancel the copy operation, press
6. Press .
• This copies the data.
7. The message "Complete!" appears when the copy operation is complete. Pressing
return to the MEMORY mode initial screen.
1
* Copying data from the storage memory or an SD card causes one of the screens shown
below to appear (fx-9860G
Pressing selects main memory and copies the data, without displaying the folder
selection screen.
The file name input screen does not appear when you copy data from storage memory
or/and SD card to main memory.
2
* To copy to the SD card, press
SD card loaded in the calculator.
II
1
SD only).*
II
SD only).
. The "No Card" error message will appear if there is no
II II
or fx-9750G calculator.
II
SD
.
11-6
will