Casio FX-7400GII - SOFTWARE VERSION 2-00 User Manual page 87

You can convert from any unit in a category to any other unit in the same category.
• Attempting to convert from a unit in one category (such as "AREA") to a unit in another
category (such as "TIME") results in a Conversion ERROR.
• See the "Unit Conversion Command List" (page 2-50) for information about the units included
in each category.
Performing a Unit Conversion Calculation
Input the value you are converting from and the conversion commands using the syntax shown
below to perform a unit conversion calculation.
{value converting from}{conversion command 1}
• Use {conversion command 1} to specify the unit being converted from and {conversion
command 2} to specify the unit being converted to.
• is a command that links the two conversion commands. This command is always available
at ( ) of the Conversion menu.
• Real numbers or a list that contains real number elements only can be used as the value
being converted from. When values being converted from are input into a list (or when list
memory is specified), conversion calculation is performed for each element in the list and
calculation results are returned in list format (ListAns screen).
• A complex number cannot be used as a value to be converted from. An error occurs if even
a single element of a list being used as the value being converted from contains a complex
number.
Example 1 To convert 50cm to inches
Example 2 To convert {175, 162, 180} centimeters to feet
( )
(cm) ( ) (LENG)
II
* fx-7400G :
({)
(})
( ) (CONV)*
( ) (AREA) (ha)
II
* fx-7400G :
{conversion command 2}
(CONV)* (LENG)
(in)
(CONV)
2
(AREA) (m )
(CONV)
2-49
[OPTN]-[CONV]