Casio FX-7400GII - SOFTWARE VERSION 2-00 User Manual page 353

• From the menu that appears after you select "Photogate" as the sensor, select
[Gate] or [Pulley].
[Gate] ............... Select this option when using the PhotoGate sensor alone.
[Pulley] ............. Select this option when using the PhotoGate sensor along with a
4(None) ......... Select this option to disable the SONIC channel.
• Mic Channel
For this channel, the sensor is automatically set to Built-in (External) Microphone.
However, you need to configure the settings described below.
1(Snd) ........... Select this option to record elapsed time and volume 2-dimensional
2(FFT) ........... Select this option to record frequency and volume 2-dimensional
4(None) ......... Select this option to disable the Mic channel.
4. Repeat steps 2 and 3 as many times as necessary to configure all the channels you want.
5. After all the settings are the way you want, press w.
• This returns to the Advanced Setup menu.
Note
• When you select a channel on the Channel Setup screen, the sampling range of the
selected channel appears in the bottom line of the screen.
In the above example, the range of the temperature sensor assigned to CH2 appears on the
display.
If the sampling range value is too long to fit on the display, only the part of the value that fits
on the display will be shown.
• Whenever the current Sample Setup (page 3-5) and Trigger Setup (page 3-8) settings
become incompatible due to a change in Channel Setup settings, these settings revert
automatically to their initial defaults. Selecting the Mic channel with Channel Setup while
the Sample Setup has "Extended" selected for the sampling mode, for example, will cause
the sampling mode to change automatically to "Fast" (which is the initial default setting
when the Mic channel is selected). For information about the channels that can be selected
for each sampling mode, see "Sample Setup" (page 3-5).
3-4
Using Advanced Setup
smart pulley.
sampled sound data (elapsed time on the horizontal axis, volume on
the vertical axis).
sampled sound data (frequency on the horizontal axis, volume on the
vertical axis).
20070101 20051101