Power Saving Mode; Cleaning - Eizo FlexScan S1932 User Manual

5-2 Power Saving Mode

■
Analog input
This monitor complies with the VESA DPMS standard.
[Power Saving System]
PC
Operating
Power saving STAND-BY
SUSPENDED
OFF
[Resumption Procedure]
• Operate the mouse or keyboard to resume the normal screen.
■
Digital input
This monitor complies with the DVI DMPM standard.
[Power Saving System]
The monitor enters the power saving mode in five seconds in connection with
the PC setting.
PC
Operating
Power saving
[Resumption Procedure]
• Operate the mouse or keyboard to resume the normal screen.

5-3 Cleaning

Clean the monitor periodically to keep the monitor clean and extend its life.
Cabinet
Clean the cabinet with a soft cloth dampened with little mild detergent.
LCD Panel
• Clean the LCD panel with a soft cloth such as cotton cloth or lens cleaning
paper.
• Remove persistent stains gently with a cloth dampened with little water, and
then clean the LCD panel again with a dry cloth for better finishing.
Monitor
Operating
Power saving
Monitor
Operating
Power saving
Power
Indicator
Blue
Orange
Power Indicator
Blue
Orange
Attention
• Unplugging the power cord
completely shuts off power supply to
the monitor.
• Power consumption changes even
when a sound input signal is detected.
Attention
• Never use any solvents or chemicals,
such as thinner, benzene, wax,
alcohol, and abrasive cleaner, which
may damage the cabinet or LCD
panel.
NOTE
• Optional ScreenCleaner is
recommended for cleaning the LCD
panel surface.
Chapter 5 Reference
27