Eizo FlexScan S1932 User Manual page 14

●
To correct screen position [Position]
(1) Select (Position).
(2) Adjust the position with
(Up) to display the image properly in the display area of the
monitor.
(3) Select .
The adjustment is completed.
5
Adjust the color gradation.
●
To adjust color gradation automatically [AutoRange]
Every color gradation (0 to 255) can be displayed by adjusting the
signal output level.
(1) Display Pattern 2 in full screen on the monitor using the "Screen
Adjustment Utility" or the screen adjustment pattern files.
(2) Press .
The adjustment menu appears.
(3) Select (Analog).
(4) Select (AutoRange).
Color gradation is adjusted automatically.
(5) After confirming the screen message, select
If you select
(6) Close the Pattern 2. When using the "Screen Adjustment Utility",
close the program.
12
Chapter 2 Settings and Adjustments
(Left) /
(Undo), the monitor returns to the pre-adjusted status.
(Right) / (Down) /
(OK).
NOTE NOTE
• Since the number of pixels and the • Since the number of pixels and the
pixel positions are fixed on the LCD pixel positions are fixed on the LCD
monitor, only one position is provided monitor, only one position is provided
to display images correctly. The to display images correctly. The
position adjustment is made to shift position adjustment is made to shift
an image to the correct position. an image to the correct position.
• When vertical bars appear on the • When vertical bars appear on the
screen after adjustment, go back to screen after adjustment, go back to
"To eliminate vertical bars [Clock]". "To eliminate vertical bars [Clock]".
(Clock → Phase → Position) (Clock → Phase → Position)