Eizo FlexScan S1932 User Manual page 27

Problems
7. Interference patterns or pressure marks remain on
the screen.
8. The outline of the letters are colored.
9. Noise appears on the screen.
10. Display position is incorrect.
11. Vertical bars appear on the screen or a part of the
image is flickering.
12. Whole screen is flickering or blurring.
13. The adjustment menu does not appear.
14. The auto adjust function does not work correctly.
15. No audio output.
16. The monitor connected with the USB cable is not
detected.
Possible cause and remedy
• Leave the monitor with a white or black screen. The
symptom may disappear.
• If the [Sharpness] setting is set to a high level, the
characters displayed on the monitor may be colored.
• When entering the signals of HDCP system, the normal
images may not be displayed immediately.
• Adjust image position so that it is displayed properly
within the display area using [Position]. (See
• If the problem persists, use the graphics board's utility if
available to change the display position.
• Adjust using [Clock]. (see
• Adjust using [Phase]. (see
• Check whether the operation lock function works.
(see page 19)
• This function does not work when digital signal is input.
• Check whether the operation lock function works.
(see page 19)
• This function does not work correctly with some graphics
boards.
• Check whether the mini jack cable is correctly connected.
• Check whether volume is set to 0.
• Check the setting of the PC and the audio playback
software.
• Check whether the USB cable is connected correctly.
• Please perform the following to check the status.
• Reboot the PC.
• Check whether the PC and OS are USB compliant. (For
USB compliance of the respective devices, consult their
manufacturers.)
• Check the PC's BIOS setting for USB when using
Windows. (Refer to the manual of the PC for details.)
Chapter 4 Troubleshooting
page 12)
page 11)
page 11)
25