Chapter 3 Connecting Cables; Connecting Two Pcs To The Monitor; To Switch The Input Signal - Eizo FlexScan S1932 User Manual

Chapter 3 Connecting Cables

3-1 Connecting Two PCs to the Monitor

Two PCs can be connected to the monitor through the DVI-D and the D-Sub
mini 15 pin connector on the back of the monitor.
Connection examples
To PC 1
DVI-D connector
Signal cable
(Digital) FD-C39
●

To switch the input signal

The input signal switches each time
When the signal is switched, the active input port name appears at the top right
corner of the screen.
22
Chapter 3 Connecting Cables
D-Sub mini
DVI-D connector 15-pin Connector
Signal cable
MD-C87
is pressed.
To PC 2
D-Sub mini 15-pin
Connector