To Adjust The Color Temperature [Temperature]; To Adjust The Gain Value [Gain]; To Adjust The Color Saturation [Saturation] - Eizo FlexScan S1932 User Manual

●

To adjust the color temperature [Temperature]

The color temperature can be adjusted. The color temperature is normally used
to express the hue of "White" and/or "Black" by a numerical value. The value
is expressed in degrees "K" (Kelvin).
In the same way as the flame temperature, the image on the monitor is displayed
reddish if the color temperature is low and is bluish if the color temperature is
high. The gain preset values are set for each color temperature setting value.
5000K The white color image is displayed reddish. The 5000K or 6000K
is usually used in the printing industry.
6500K The white color image is displayed in warm white like paper white.
The temperature is suitable to display photographs or video
images.
9300K The white color image is displayed slightly bluish white.
Adjustable range: Native, 4000K-10000K (specified by every 500K unit,
including 9300K), User (at gain adjustment)
(1) Press .
The adjustment menu appears.
(2) Select (Color).
(3) Select (Color Menu).
(4) Adjust the color temperature with
(5) Select .
The adjustment is completed.
●

To adjust the gain value [Gain]

Each luminance of red/green/blue composing the color is called "Gain". The
gain adjustment may change the color tone of the "White" (when the max input
signal for each color is obtained)
Adjustable range: 0 to 100%
(1) Press .
The adjustment menu appears.
(2) Select (Color).
(3) Select (Color Menu).
(4) Select (Gain).
(5) Adjust the respective value of
or .
(6) Select .
The adjustment is completed.
●

To adjust the color saturation [Saturation]

This function allows you to adjust the saturation of the color on the monitor.
Adjustable range: -100 to 100
(1) Press .
The adjustment menu appears.
(2) Select (Color).
(3) Select (Color Menu).
(4) Select (Advanced).
(5) Adjust the saturation with
(6) Select .
The adjustment is completed.
16
Chapter 2 Settings and Adjustments
or of (Temperature).
(Red)/ (Green)/
or of (Saturation).
NOTE NOTE
• You cannot adjust the value if the • You cannot adjust the value if the
icon is not displayed, depending on icon is not displayed, depending on
the FineContrast mode selected. (See the FineContrast mode selected. (See
"Adjustment items in each mode" on "Adjustment items in each mode" on
page 14.) page 14.)
• [Gain] allows you to perform more • [Gain] allows you to perform more
advanced adjustment (See "To adjust advanced adjustment (See "To adjust
the gain value" on page 16). the gain value" on page 16).
• If you set to [Native], the image is • If you set to [Native], the image is
displayed in the preset color of the displayed in the preset color of the
monitor (Gain: 100% for each RGB). monitor (Gain: 100% for each RGB).
• When changing the gain value, the • When changing the gain value, the
color temperature adjusting range is color temperature adjusting range is
changed to "User". changed to "User".
NOTE NOTE
• You cannot adjust the value if the • You cannot adjust the value if the
icon is not displayed, depending on icon is not displayed, depending on
the FineContrast mode selected. (See the FineContrast mode selected. (See
"Adjustment items in each mode" on "Adjustment items in each mode" on
page 14.) page 14.)
• The gain value may change depending • The gain value may change depending
on the value of the color temperature. on the value of the color temperature.
• When changing the gain value, the • When changing the gain value, the
color temperature adjusting range is color temperature adjusting range is
changed to "User". changed to "User".
(Blue) with
Attention Attention
• This function does not enable to • This function does not enable to
display every color gradation. display every color gradation.
NOTE NOTE
• You cannot adjust the value if the • You cannot adjust the value if the
icon is not displayed, depending on icon is not displayed, depending on
the FineContrast mode selected. (See the FineContrast mode selected. (See
"Adjustment items in each mode" on "Adjustment items in each mode" on
page 14.) page 14.)
• Setting the minimum (-100) turns the • Setting the minimum (-100) turns the
image to a monochrome screen. image to a monochrome screen.