Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router Software Configuration Manual page 287

Chapter 8 Console Port, Telnet, and SSH Handling
The current access-policies
Method
Rule
Shell banner:
Welcome to Diagnostic Mode
Wait banner :
Waiting for IOS Process
Method
Rule
Shell banner:
Wait banner :
Method
Rule
Shell banner:
Wait banner :
Router# configure terminal
Enter configuration commands, one per line.
Router(config)# transport-map type persistent ssh sshhandler
Router(config-tmap)# connection wait allow interruptible
Router(config-tmap)# banner diagnostic X
Enter TEXT message.
Welcome to Diag Mode
X
Router(config-tmap)# banner wait X
Enter TEXT message.
Waiting for IOS
X
Router(config-tmap)# rsa keypair-name sshkeys
Router(config-tmap)# transport interface gigabitethernet 0
Router(config-tmap)# exit
Router(config)# transport type persistent ssh input sshhandler
Router(config)# exit
Router# show platform software configuration access policy
The current access-policies
Method
Rule
Shell banner:
Welcome to Diagnostic Mode
Wait banner :
Waiting for IOS process
Method
Rule
Shell banner:
Welcome to Diag Mode
Wait banner :
Waiting for IOS
Method
OL-16506-10
: telnet
: wait with interrupt
: ssh
: wait
: console
: wait with interrupt
End with the character 'X'.
End with the character 'X'.
: telnet
: wait with interrupt
: ssh
: wait with interrupt
: console
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
Viewing Console Port, SSH, and Telnet Handling Configurations
End with CNTL/Z.
8-15