Displaying Call Home Configuration Information - Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router Software Configuration Manual

Chapter 7 Configuring Call Home
For more information about using the Smart Call Home web application, see Smart Call Home User
Guide. This user guide also includes configuration examples for sending Smart Call Home messages
directly from your device or through a transport gateway (TG) aggregation point. You can use a TG
aggregation point in cases requiring support for multiple devices or in cases where security requirements
mandate that your devices must not be connected directly to the Internet.

Displaying Call Home Configuration Information

You can use variations of the show call-home command to display Call Home configuration
information.
To display the configured Call Home information, use one or more of the following commands:
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
DETAILED STEPS
Command or Action
Step 1
show call-home
Example:
Router# show call-home
Step 2
show call-home detail
Example:
Router# show call-home detail
Step 3
show call-home alert-group
Example:
Router# show call-home alert-group
Step 4
show call-home mail-server status
Example:
Router# show call-home mail-server status
OL-16506-10
show call-home
show call-home detail
show call-home alert-group
show call-home mail-server status
show call-home profile {all | name}
show call-home statistics
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
Displaying Call Home Configuration Information
Purpose
Displays the Call Home configuration in summary.
Displays the Call Home configuration in detail.
Displays the available alert groups and their status.
Checks and displays the availability of the configured
e-mail server(s).
7-31