Configuring The Throughput Delay - Cisco 7604-RSP720C-R Configuration Manual

Configuring the Basic Interface Parameters
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m

Configuring the Throughput Delay

You can configure the interface throughput delay for Ethernet interfaces. The actual delay time does not
change, but you can set an informational value between 1 and 16777215, where the value represents the
number of tens of microseconds.
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
DETAILED STEPS
Command
Step 1
configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2
interface ethernet slot/port
Example:
switch(config)# interface ethernet 3/1
switch(config-if)#
Step 3
delay value
Example:
switch(config-if)# delay 10000
switch(config-if)#
Step 4
show interface ethernet slot/port
Example:
switch(config)# show interface ethernet 3/1
switch(config-if)#
Step 5
exit
Example:
switch(config-if)# exit
switch(config)#
Step 6
copy running-config startup-config
Example:
switch(config)# copy running-config startup-config
Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x
2-36
configure terminal
interface ethernet slot/port
delay value
show interface ethernet slot/port
exit
copy running-config startup-config
Chapter 2 Configuring Basic Interface Parameters
Purpose
Enters configuration mode.
Specifies an interface to configure, and
enters interface configuration mode.
Specifies the delay time in tens of
microseconds. You can set an
informational value range between 1
and 16777215 tens of microseconds.
Displays the interface status, which
includes the throughput-delay time.
Exits the interface mode.
(Optional) Copies the running
configuration to the startup
configuration.
OL-23435-03