Verifying The Port-Channel Configuration - Cisco 7604-RSP720C-R Configuration Manual

Verifying the Port-Channel Configuration

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
Verifying the Port-Channel Configuration
To display port-channel configuration information, perform one of the following tasks:
Command
show interface port-channel channel-number
show feature
load- interval {interval seconds {1 | 2 | 3}}
show port-channel compatibility-parameters
show port-channel database [interface
port-channel channel-number]
show port-channel load-balance
show port-channel summary
show port-channel traffic
show port-channel usage
show lacp {counters [interface port-channel
channel-number] | [interface type/slot] |
neighbor [interface port-channel
channel-number] | port-channel [interface
port-channel channel-number] |
system-identifier]]}
show running-config interface port-channel
channel-number
For more information about these commands, see the Cisco Nexus 7000 Series NX-OS Interfaces
Command Reference, Release 5.x.
Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x
6-42
Chapter 6
Purpose
Displays the status of a port-channel interface.
Displays enabled features.
Beginning with Cisco NX-OS Release 4.2(1) for
the Cisco Nexus 7000 Series devices, sets three
different sampling intervals to bit-rate and
packet-rate statistics.
Displays the parameters that must be the same
among the member ports in order to join a port
channel.
Displays the aggregation state for one or more
port-channel interfaces.
Displays the type of load balancing in use for port
channels.
Displays a summary for the port-channel
interfaces.
Displays the traffic statistics for port channels.
Displays the range of used and unused channel
numbers.
Displays information on LACP.
Displays information on the running
configuration of the port-channel.
Configuring Port Channels
OL-23435-03