Troubleshooting - TRENDnet TK-802R Quick Installation Manual

Troubleshooting

Do I need to use the included external AC adapter?
It is recommended that you use the included external AC adapter with the TK-802R KVM
switch.
Can I connect or disconnect the KVM cables while the computers are turned on?
Yes, you can connect or disconnect the KVM cables while the computers are turned on,
because the interface is Hot-Pluggable.
Will the KVM switch restore the keyboard settings when switching between computers?
Yes, the KVM switch will restore the keyboard settings when switching between computers.
(i.e.: Caps Lock, Num Lock, etc.)
The KVM switch prompts for a password. What should I do?
The default password is 00000000. Type this in. If this does not work, follow the below
procedure to reset the KVM switch:
1. Shutdown your computers.
2. Unplug the power to the KVM switch.
3. Press on the reset button using a pin or paper clip. The reset button is on the back of the
KVM switch, next to the power.
4. Plug the power while still pressing on the reset button.
5. Wait for the beep and let go.
How do I switch from one computer to another with the KVM switch?
You can switch computers by pressing the Push Buttons on the KVM switch or using the Hot
Key commands. Go to Section 3 Operation for more information.
If you still encounter problems or have any questions regarding the TK-802R, please contact
TRENDnet's Technical Support Department.
9